Besides damaging health and make uncomfort, the damp walls of the house due to wet and moldy can be damage the walls and reduce the beauty of the house. A damp room will cause the walls to peel and make a bad odor due to mold. In addition, wooden furniture in the room is also easily weathered. This kind of damp room is not healthy for occupants of the room. Humid rooms can trigger respiratory tract pain. Therefore, you need to immediately resolve the problem of a humid room. Here we summarize tips on overcoming humid rooms.
The cause of the humid room are so many. Among them is the absence of a gap of sunlight entering to the room. Or maybe the absence of air change is the main cause of damp rooms. often the position of the room at the back tends to be damp because there are no windows or sunlight. This can be even worse if there is a critical leak at the roof. You must act immediately before the occupants' health deteriorates. If you have a room without an air change gap, you can do a number of things as follows:
- For the problem of lack of sun lighting, you can solve by replacing four roof tiles above the damp room with glass tile. This can help sunlight enter to the room every afternoon. So that the damp air can be reduced.
- For leaky roof problems, immediately repair any leaks. If left continuously, it will cause severe and damaging leaks and make the paint peel off. In addition, the furniture in the room was affected and easily weathered.
Finding the cause and finding a solution is the most effective and fast way to solve the problem of humid room.
2. Ventilate
The second tips to solve the humid room is make the ventilation. If it does not allow ventilation to come out because the house is coincide to the neighbor's house, you can placement the ventilation above the door. The presence of ventilation is very important for air circulation. Following general rules make ventilation in rooms:
- The minimum area for ventilation is 15% of the floor size. The area of incidental ventilation holes is at least 5% of the floor area.
- The incoming air flow should be facing each other (cross ventilation), but if not possible, one vent above the door is better. This can be overcome by adding exhaust fans that are sold in the market.
- The function of this ventilation is to help circulate air in and out and reduce air humidity.
3. Install the Exhaust Fan
The exhaust fan is different with the fan. The exhaust fan is shaped like a fan but has a two-round mode that can suck air in the room and throw it out. So using the exhaust fan can make the room's damp air less and make the room become cool. There are three types of exhaust fans based on how they are installed:
- Ceiling mount. This type of exhaust is installed in the ceiling of the house
- Wall mounted. Exhaus this type is planted on the wall
- Window mounted. This type of exhaust is installed on the sills or ventilation holes.
The three types of exhaust fans have the same use. For the easiest way to install, of course the choice is window mount . For a room that has no air flow in and out, a ceiling mount or type of exhaust fan installed in the ceiling is the best choice
4. Use Anti-damp Wall Paint
Humid rooms certainly make the walls dull because of mold. In addition, the paint will easily peel off and the cement of wall will fall out. This can be hapen because the plastering of the wall is not waterproof, so the splash of rain seeps between the pores of the wall. You also need to watch out for cracked walls. Therefore, the wall should be reinforced with a layer of cement so that it becomes more waterproof because the wall pores do not absorb water.
Next, you need to paint the wall with waterproof paint. Some waterproof wall paints are sold on the market. Water repellent paint has elastic and waterproof properties. It is suitable for use on the outer walls, asbestos, zinc, concrete and terracotta surfaces.
5. Use Moist Air Absorbers
Then the next tips to solve the humid room is use a damp air absorbers. There are many types of moisture absorbers in the market that you can choose. Starting from the absorbent packaging room to natural air absorbers.
- There are many types of absorbent packaging on the market. Some are in the form of chalk or powder. Put this packaging product in the corner of a damp room. Chalk and powder inside will absorb water content in the air. Furthermore, lime and powder that has absorbed water will turn into a gel. After that, you need to replace it with a new one because it is no longer effective in a damp room. You can get some packaging products at the store.
- There ara also natural absorbing objects. in example limestone lime, charcoal, coarse salt. You can get these three natural objects at the nearest store. The advantages of these objects can be used repeatedly. You just have to put one coarse lime / salt container in the corner of the humid room. After one month, you just have to dry it again. Once dry, you can use it again. Save enough
So thats the tips to solve the humid room. perhaps it will be useful for you.
